Evaluation Study of Electric Submersible Pump (ESP) IND-1000 Pump Model with Analysis of the Flow Rate of Crude Oil in Production Well

Isnani Agriandita; Abdul Kamid; Reza Luthfi Atha Wijaya

doi:10.31958/js.v14i2.7124

Evaluation Study of Electric Submersible Pump (ESP) IND-1000 Pump Model with Analysis of the Flow Rate of Crude Oil in Production Well

Isnani Agriandita, Abdul Kamid, Reza Luthfi Atha Wijaya

Abstract

ESP is an artificial lift with the principle of a centrifugal pump, where the production fluid that enters through the intake will be thrown by the impeller into the diffuser which will then be directed to the impeller above it so that this process repeats until the production fluid reaches the surface. The longer the production well is produced, the smaller or weakened the Pwf pressure will be, therefore an evaluation is needed in order to produce optimal production. The data needed include: well production rate (Qo), well flow pressure (Pwf), Pump Intake Pressure (PIP), Total Dynamic Head (TDH), Pump type, namely IND-1000 pump, Number of stages, Type of motor, HP motor, motor voltage, Electric current, OD motor, Total voltage, and Total starting voltage. The evaluation methodology used is to determine the optimum production rate through IPR calculations using the vogel method, Pump Intake Pressure (PIP), Total Dynamic Head (TDH), number of stages, and horse power (HHP). From the results of this evaluation, the optimal production rate (Qopt) value was obtained, which was 988.552 BPD. This optimal production rate value is still included in the capacity range, which is between 600-1260 BFPD. Because the optimal production rate is still within the range capacity, this production well does not require a new pump replacement.

Keywords

Well production rate; Pump Intake Pressure; Total Dynamic Head; Vogel methods; Range Capacity.

Full Text:

PDF

References

Ahuluheluw, J., Massolo, L. D., & Nugraha, P. (2020). Sensitivitas Jumlah Stages pada Desain ESP Sumur Directional “ X ” Lapangan Salawati. INTAN Jurnal Penelitian Tambang, 3(1), 14–19.

Guo, B., Liu, X., & Tan, X. (2017). Petroleum Production Engineering Petroleum Production Engineering (2nd ed.). Gulf Professional Publishing.

Jaya, P., Rahman, A., & Herlina, W. (2014). Evaluasi Pompa Electric Submersible Pump (ESP) Untuk Optimasi Produksi pada Sumur P-028 dan P-029 di PT. PERTAMINA EP Asset 2 Pendopo Field Evaluation Electric Submersible Pump (ESP) For Optimzation Production at the Well P-028 and P-029 PT . PERTAMINA. Jurnal Ilmu Teknik, 2(4).

Jayanti, P. D., Sudibyo, R., & Sulustiyanto, D. (2015). Evaluasi dan Optimasi pompa Electric Submersible Pump (ESP) Pada Sumur-sumur di Lapangan X. Seminar Nasional Cendekiawan, 376–386.

Nataliana, D., Taryana, N., & Akbar, R. A. (2018). Studi Korelasi antara Kapasitas Daya Motor Electrical Submersible Pump terhadap 4 Parameter Sumur Minyak. ELKOMIKA, 6(1), 79–96.

Pranondo, D., Sobli, T. C., Studi, P., Eksplorasi, T., Migas, P., & Akamigas, P. (2020). Analisis sumur dengan inflow performance relationship metode vogel serta evaluasi tubing menggunakan analisis nodal pada sumur tcs. Jurnal Teknik Patra Akademika, 11(02), 33–42.

PT. Epsindo Jaya Pratama. (2006). Product Catalog: Electric Submersible Pumping System Development & Manufacturing Made in Indonesia.

Sari, D. A., Soepryanto, A., & Burhanuddin, S. (2016). Re-Design Electric Submersible Pump Pada PT Chevron Pacific Indonesia – Minas Pekanbau. Jurnal Ilmu Dan Aplikasi Teknik, 1(1), 25–33.

Sugiharto, A. (2012). Optimasi Produksi Lapangan Minyak Menggunakan Metode Artificial Lift Dengan ESP Pada Lapangan Terintegrasi. Swara Patra, 02(1), 1–14.

Takacs, G. (2007). Installing Successful ESPS Through Effective Design And Analysis Conducted. IQPC: International Quality & Productivity Centre.

Wahono, P. A., Komar, S., & Suwardi, F. R. (2015). Evaluasi Pompa ESP Terpasang untuk Optimasi Produksi Minyak PT . PERTAMINA Asset I Field Ramba. 21(1).

DOI: http://dx.doi.org/10.31958/js.v14i2.7124